Events

May 30th, 2021, 11am – 5pm: MIG Welding 101 with Kiefer: Make Your Own Chain Lamp!

By board | November 11, 2022 |

This class is intended for beginner welders and/or those looking to brush up on rusty skills while building something fun and functional. This class provides the foundation for basic fabrication techniques using a MIG welder. Students will learn to tack-weld into place, fully weld steel. Each student will make and take home an industrial lamp…

May 23rd, 2021, 11am – 5pm: MIG Welding 101 with Kiefer: Make Your Own Chain Lamp!

By board | November 11, 2022 |

This class is intended for beginner welders and/or those looking to brush up on rusty skills while building something fun and functional. This class provides the foundation for basic fabrication techniques using a MIG welder. Students will learn to tack-weld into place, fully weld steel. Each student will make and take home an industrial lamp…

May 9th, 2021, 9am – 4pm: Welding 101 with Kiefer – Intro to Stick Welding (SMAW)

By board | November 11, 2022 |

Learn the basics of flat stick welding on steel! Description: This is a beginner class which will teach the basics of stick welding. We will be going over safety, how to run a good bead, padding, and more! Requirements: No experience needed! Safety notes: Students are not permitted to wear open toed shoes, and they…

February 21, 2021 – Make a Cutting/Charcuterie Board – A Wood Shop Class December 13, 2020 –

By board | November 11, 2022 |

Need a beautiful, conditioned cutting/charcuterie board for the holidays? Or want to show that special someone your new skill in woodworking? This woodworking class will aim to educate others on the safety and protocol of common machines used in woodworking, especially those used to make charcuterie boards from live edge cuts of maple or walnut.…

February 14, 2021 – Make a Cutting/Charcuterie Board – A Wood Shop Class December 13, 2020 –

By board | November 11, 2022 |

Need a beautiful, conditioned cutting/charcuterie board for the holidays? Or want to show that special someone your new skill in woodworking? This woodworking class will aim to educate others on the safety and protocol of common machines used in woodworking, especially those used to make charcuterie boards from live edge cuts of maple or walnut.…

February 7, 2021 – Make a Cutting/Charcuterie Board – A Wood Shop Class December 13, 2020 –

By board | November 11, 2022 |

Need a beautiful, conditioned cutting/charcuterie board for the holidays? Or want to show that special someone your new skill in woodworking? This woodworking class will aim to educate others on the safety and protocol of common machines used in woodworking, especially those used to make charcuterie boards from live edge cuts of maple or walnut.…

December 20, 2020 – Make a Cutting/Charcuterie Board – A Wood Shop Class December 13, 2020 –

By board | November 11, 2022 |

Need a beautiful, conditioned cutting/charcuterie board for the holidays? Or want to show that special someone your new skill in woodworking? This woodworking class will aim to educate others on the safety and protocol of common machines used in woodworking, especially those used to make charcuterie boards from live edge cuts of maple or walnut.…

December 13, 2020 – Make a Cutting/Charcuterie Board – A Wood Shop Class December 13, 2020 –

By board | November 11, 2022 |

Need a beautiful, conditioned cutting/charcuterie board for the holidays? Or want to show that special someone your new skill in woodworking? This woodworking class will aim to educate others on the safety and protocol of common machines used in woodworking, especially those used to make charcuterie boards from live edge cuts of maple or walnut.…

December 5, 2020, 1pm-5pm: CLASS: Learn to Solder Flashing LED Xmas Tree!

By board | November 11, 2022 |

What is this class? This class is an introduction to soldering for the complete beginner. We will teach you to solder or help you practice your skills if they are a little rusty. We will guide you through the process of building an Icstation DIY 3D Xmas Tree Kit, perfect in time for the holidays!…

November 21st, 11am – 5pm: MIG Welding 101 with Kiefer: Make Your Own Chain Lamp!

By board | October 21, 2020 |

This class is intended for beginner welders and/or those looking to brush up on rusty skills while building something fun and functional. This class provides the foundation for basic fabrication techniques using a MIG welder. Students will learn to tack-weld into place, fully weld steel. Each student will make and take home an industrial lamp…